Umkhiqizo

Isithombe Esivelele Esisekelwe ku-TPO I-elastomer ye-thermoplastic evumelana nesikhumba i-Si-TPV 2150-55A

I-thermoplastic elastomer Si-TPV 2150-55A esekelwe ku-TPO evumelana nesikhumba

I-SILIKE Si-TPV® 2150-55A thermoplastic elastomer iyi-elastomer enamandla e-thermoplastic esuselwe ku-silicone eyenziwe ngobuchwepheshe obukhethekile obuhambisanayo ukusiza irabha ye-silicone ihlakazeke ku-TPO ngokulinganayo njengezinhlayiya ze-micron ezingu-2~3 ngaphansi kwe-microscope. Lezo zinto eziyingqayizivele zihlanganisa amandla, ukuqina kanye nokumelana nokuguguleka kwanoma iyiphi i-thermoplastic elastomer nezakhiwo ezifiselekayo ze-silicone: ukuthamba, ukuzizwa okusilika, ukukhanya kwe-UV kanye nokumelana namakhemikhali okungaphinde kusetshenziswe futhi kusetshenziswe kabusha ezinqubweni zokukhiqiza zendabuko.

Sithumelele i-imeyili

Imininingwane Yomkhiqizo

Amathegi Omkhiqizo

Isevisi yesampula

Ividiyo

Incazelo

I-Si-TPV® 2150-55A ingaxhuma kahle kakhulu ne-TPE kanye nezinye izinto ezifana ne-polar substrates njenge-PP, PA, PE, PS, njll. Ingumkhiqizo owenzelwe ukubumba okuthambile kuma-electronics agqokwayo, amakesi ezinsiza zamadivayisi kagesi, izimboni zezimoto, i-TPE ephezulu, izintambo ze-TPE.......

Izakhiwo ezijwayelekile zemishini

Into yokuhlola	Impahla	Iyunithi	Umphumela
I-ISO 37	Ukwelula Ngesikhathi Sokuphumula	%	590
I-ISO 37	Amandla Okucindezela	I-Mpa	6.7
I-ISO 48-4	Ukuqina Kogu lolwandle	Ugu A	55
I-ISO1183	Ubuningi	g/cm3	1.1
I-ISO 34-1	Amandla Okudabuka	kN/m	31
--	I-Modulus ye-Elasticity	I-Mpa	4.32
--	I-MI(190℃,10KG)	g/10 iminithi	13
--	Izinga Lokushisa Elincibilikayo Eliphezulu	℃	220
--	Izinga Lokushisa Eliphezulu Lesikhunta	℃	25

Izici

Ukuhambisana kwe-SEBS, PP, PE, PS, PET, PC, PMMA, PA

Izinzuzo

1. Nikeza ubuso ngokuthinta okuhlukile okuthambile nokunobungani nesikhumba, umuzwa wesandla othambile onezakhiwo ezinhle zomshini.

2. Akuqukethe i-plasticizer namafutha okuthambisa, akukho ngozi yokopha/enamathelayo, akukho phunga.

3. Ukumelana okuzinzile kwe-UV kanye namakhemikhali okunesibopho esihle kakhulu ku-TPE kanye nezingxenye ezifanayo ze-polar.

4. Nciphisa ukumuncwa kothuli, ukumelana nowoyela kanye nokunciphisa ukungcola.

5. Kulula ukuyikhipha, futhi kulula ukuyiphatha.

6. Ukumelana nokuklwebheka okuhlala isikhathi eside kanye nokumelana nokuchotshozwa kanye nokumelana nokuklwebheka.

7. Ukuguquguquka okuhle kakhulu nokumelana nokugoba.

.....

Isetshenziswa kanjani

Ukubumba ngomjovo ngqo.

• Umhlahlandlela Wokucubungula Ukubumba Ngomjovo

Isikhathi Sokomisa	Amahora angu-2–4
Izinga Lokushisa Lokomisa	60–80°C
Izinga Lokushisa Lendawo Yokuphakelayo	180–190°C
Izinga Lokushisa Lendawo Ephakathi	190–200°C
Izinga Lokushisa Lendawo Engaphambili	200–220°C
Izinga lokushisa le-Nozzle	210–230°C
Izinga Lokushisa Elincibilikayo	220°C
Izinga Lokushisa Lesikhunta	20–40°C
Isivinini Somjovo	I-Medical

Lezi zimo zenqubo zingahluka ngokwemishini nezinqubo ngazinye.

• Ukucubungula Kwesibili

Njengezinto ze-thermoplastic, izinto ze-Si-TPV® zingacutshungulwa ngokwesibili ngemikhiqizo evamile.

• Ukucindezela Kokubumba Ngomjovo

Ingcindezi yokubamba incike kakhulu ku-geometry, ukujiya kanye nendawo yesango lomkhiqizo. Ingcindezi yokubamba kufanele isethwe ibe nenani eliphansi ekuqaleni, bese ikhuphuka kancane kancane kuze kube yilapho kungekho ziphambeko ezihlobene ezibonakala kumkhiqizo obunjwe ngomjovo. Ngenxa yezakhiwo zokunwebeka zezinto, ingcindezi yokubamba ngokweqile ingabangela ukuwohloka okukhulu kwengxenye yesango lomkhiqizo.

• Ukucindezeleka komhlane

Kunconywa ukuthi ingcindezi yangemuva lapho isikulufu sihoxiswa kufanele ibe ngu-0.7-1.4Mpa, okungeke nje kuqinisekise ukufana kokuncibilika kokuncibilika, kodwa futhi kuqinisekise ukuthi izinto aziboli kakhulu ngokucheba. Isivinini sesikulufu esinconywayo se-Si-TPV® singu-100-150rpm ukuqinisekisa ukuncibilika okuphelele kanye nokufakwa kwepulasitiki kwezinto ngaphandle kokuwohloka kwezinto okubangelwa ukushisa kwe-shear.

Isaziso

1. Imikhiqizo ye-Si-TPV elastomer ingakhiqizwa kusetshenziswa izinqubo ezijwayelekile zokukhiqiza i-thermoplastic, okuhlanganisa ukubumba ngaphezulu noma ukuhlanganisa ngezingxenye zepulasitiki ezifana ne-PP, PA.

2. Ukuzwakala okusilika kakhulu kwe-Si-TPV elastomer akudingi izinyathelo ezengeziwe zokucubungula noma zokufaka.

3. Izimo zenqubo zingahluka ngokwemishini nezinqubo ngazinye.

4. Kunconywa ukomisa nge-desiccant esusa umswakama kuyo yonke indawo.